New The newest addition to the NoCut product family

NoCut bumper also combines the most simple handling with a stronger fabric structure and improved cut protection.

During the lifting process, the NoCut bumper can be placed at critical points between the load and the lifting sling quickly and without fastening. Depending on use, the cut protection can be used in the crosswise or longitudinal direction.

The NoCut bumper is composed of a NoCut sleeve with interior layers of webbing which increase the radius at the deviating and attachment points of the load. It is always used if the NoCut sleeve or NoCut pad cannot be used due to difficult to access locations.

...

New Optimised process technology

Improved cut protection, simplified handing and stronger material stability increase service life and safety.

...

Lightweight

The lightweight construction makes for simple and ergonomic handling.

...

Free positioning

NoCut can be freely positioned over the lifting sling and offers protection at exactly the place where the sharp edge is connected.

...

Neu Label

NoCut products are marked with a label containing the handling instructions and the general product information. A second label uses colored illustration to show how to use NoCut safely to avoid misuse and increase the safety at work.

...

Certified Safety

A high level of operational safety based on defined edge radii – DEKRA certified.

...

Flexible hose construction

The flexible fabric construction can be positioned easily and blends to the form of the edge.

In order to protect the lifting sling, the NoCut bumper may be used as follows:

The ends of the NoCut bumper have to extend beyond the width of the lifting accessory evenly by at least 50 mm on both sides.

Working together by design

It goes without saying that NoCut sleeve has been adapted to the different widths of the SpanSet lifting slings and roundslings. For this reason, NoCut sleeve is excellently suited to protecting textile lifting slings such as PowerStar lifting slings and SupraPlus roundslings. NoCut cut protection offers a lightweight and compact construction for especially ergonomic handling with a low level of effort.


Type ca. outer width [mm] ca. length [mm] ca. thickness [mm]
NCB-175 175 340 33
NCB-205 205 400 33
NCB-265 265 520 33
Lifting device NoCut bumper
Radii [mm] 2
Lifting belts:
Liftfix [HB] ≤ 5t
PowerStar 4layers [PCS] ≤ 10t
Round slings:
SupraPlus, Twintex, Liftfix ≤ 5t
MagnumPlus, SupraPlus, Twintex, Liftifx ≤ 10t
MagnumPlus, Liftifx ≤ 20t
MagnumPlus, Liftifx ≤ 25t
MagnumPlus, Liftifx ≤ 30t
MagnumPlus, Liftifx ≤ 40t
MagnumPlus, Liftifx ≤ 50t
Neu Magnum-X ≤ 60t
Magnum-X ≤ 10t
Magnum-X ≤ 20t
Values in the table marked with refer to the minimum radius where NoCut may still be employed. Larger edge radii are included in the respective labelling.